SHIFT

--- Sjoerd Hooft's InFormation Technology ---

User Tools

Site Tools


netappsimulator
Differences

This shows you the differences between two versions of the page.

Link to this comparison view

netappsimulator [2017/01/03 11:23] (current)
Line 1: Line 1:
 += NetApp Simulator =
  
 +> Note: This page is about NetApp Simulator. If you want to read about setting up a NetApp filer all the way from the beginning read [[netappsetup]].
 +
 +This configuration is done on a simulator. There might be small differences compared to the real world. This configuration is done on ONTAP 7.3.4. ​
 +
 +> Haven'​t started myself yet, but simulator version 9 is out. Someone already created a pretty cool ebook about it: http://​www.flackbox.com/​netapp-simulator/​
 +
 += Installation Simulator=
 +<​code>​
 +LX-Simulator:/​sim_install # ./setup.sh
 +
 +Script version 22 (18/​Sep/​2007)
 +Where to install to? [/sim]:
 +Would you like to install as a cluster? [no]:
 +Would you like full HTML/PDF FilerView documentation to be installed [yes]:
 +Continue with installation?​ [no]: yes
 +Creating /sim
 +Unpacking sim.tgz to /sim
 +Configured the simulators mac address to be [00:​50:​56:​16:​df:​b9]
 +Please ensure the simulator is not running.
 +Your simulator has 3 disk(s). How many more would you like to add? [0]: 25
 +
 +The following disk types are available in MB:
 +        Real (Usable)
 +  a -   ​43 ​  ( 14)
 +  b -   ​62 ​  ( 30)
 +  c -   ​78 ​  ( 45)
 +  d -  129   ( 90)
 +  e -  535   (450)
 +  f - 1024   (900)
 +
 +If you are unsure choose the default option a
 +What disk size would you like to use? [a]: f
 +Disk adapter to put disks on? [0]:
 +Use DHCP on first boot? [yes]: no
 +Ask for floppy boot? [no]: yes
 +Your default simulator network interface is already configured to eth1.
 +Which network interface should the simulator use? [eth1]:
 +Your system has 717MB of free memory. The smallest simulator memory you should choose is 110MB. The maximum simulator memory is 677MB.
 +The recommended memory is 512MB.
 +How much memory would you like the simulator to use? [512]:
 +Create a new log for each session? [no]:
 +Overwrite the single log each time? [yes]:
 +Adding 25 additional disk(s).
 +Complete. Run /​sim/​runsim.sh to start the simulator.
 +You have new mail in /​var/​mail/​root
 +</​code>​
 +
 += Configuration Simulator=
 +<​code>​
 +LX-Simulator:/​sim # ./runsim.sh
 +runsim.sh script version Script version 22 (18/​Sep/​2007)
 +This session is logged in /​sim/​sessionlogs/​log
 +floppy boot? yes
 +
 +NetApp Release 7.3.4: Thu May 27 15:43:26 PDT 2010
 +Copyright (c) 1992-2010 NetApp.
 +Starting boot on Mon Apr 18 10:21:43 GMT 2011
 +Mon Apr 18 10:22:25 GMT [iomem.init.fail:​CRITICAL]:​ Failed to initialize acceleration card (model name X1938A-R5, serial number 5012345670, part number virgo-simulator) in slot 1.
 +Mon Apr 18 10:22:25 GMT [fmm.domain.card.failure:​error]:​ PAM II in slot 1 (model name X1938A-R5, serial number 5012345670, part number virgo-simulator):​ Flash device failed and needs to be updated or repaired or replaced.
 +
 +
 +(1)  Normal boot.
 +(2)  Boot without /etc/rc.
 +(3)  Change password.
 +(4)  Initialize all disks.
 +(4a) Same as option 4, but create a flexible root volume.
 +(5)  Maintenance mode boot.
 +
 +Selection (1-5)? 1
 +Mon Apr 18 10:22:59 GMT [fmmb.current.lock.disk:​info]:​ Disk v4.16 is a local HA mailbox disk.
 +Mon Apr 18 10:22:59 GMT [fmmb.current.lock.disk:​info]:​ Disk v4.17 is a local HA mailbox disk.
 +Mon Apr 18 10:22:59 GMT [fmmb.instStat.change:​info]:​ normal mailbox instance on local side.
 +Mon Apr 18 10:23:02 GMT [raid.cksum.replay.summary:​info]:​ Replayed 0 checksum blocks.
 +Mon Apr 18 10:23:02 GMT [raid.stripe.replay.summary:​info]:​ Replayed 0 stripes.
 +sparse volume upgrade done. num vol 0.
 +Vdisk Snap Table for host:0 is initialized
 +Mon Apr 18 10:23:05 GMT [vol.language.unspecified:​info]:​ Language not set on volume vol0. Using language config "​C"​. Use vol lang to set language.
 +Mon Apr 18 10:23:05 GMT [rc:​notice]:​ The system was down for 23375579 seconds
 +Mon Apr 18 10:23:05 GMT [useradmin.added.deleted:​info]:​ The role '​compliance'​ has been added.
 +Mon Apr 18 10:23:06 GMT [useradmin.added.deleted:​info]:​ The group '​Backup Operators'​ has been modified.
 +/etc/rc is missing. Running configuration dialog.
 +
 +        NetApp Release 7.3.4: Thu May 27 15:43:26 PDT 2010
 +        System ID: 0099929383 ()
 +        System Serial Number: 987654-32-0 ()
 +        System Storage Configuration:​ Multi-Path
 +        System ACP Connectivity:​ NA
 +        Model Name: Simulator
 +        Processors: 1
 +        slot 0: NetApp Virtual SCSI Host Adapter v0
 +                28 Disks: ​            ​25.8GB
 +                3 shelves with LRC
 +        slot 1: NetApp Virtual SCSI Host Adapter v1
 +        slot 2: NetApp Virtual SCSI Host Adapter v2
 +        slot 3: NetApp Virtual SCSI Host Adapter v3
 +        slot 4: NetApp Virtual SCSI Host Adapter v4
 +                28 Disks: ​            ​25.8GB
 +                3 shelves with LRC
 +        slot 5: NetApp Virtual SCSI Host Adapter v5
 +        slot 6: NetApp Virtual SCSI Host Adapter v6
 +        slot 7: NetApp Virtual SCSI Host Adapter v7
 +        slot 8: NetApp Virtual SCSI Host Adapter v8
 +                4 Tapes: ​           VT-100MB
 +                                    VT-100MB
 +                                    VT-100MB
 +                                    VT-100MB
 +Please enter the new hostname []: Mon Apr 18 10:23:13 GMT [shelf.config.multipath:​info]:​ All attached storage on the system is multi-pathed.
 +
 +Invalid hostname.
 +A valid hostname consists of alphanumeric characters [a-zA-Z0-9]
 +         and dash [-].
 +Please enter the new hostname []: flipflap01
 +Do you want to enable IPv6? [n]:
 +Do you want to configure virtual network interfaces? [n]:
 +Please enter the IP address for Network Interface ns0 []: 10.10.10.30
 +Please enter the netmask for Network Interface ns0 [255.0.0.0]:​ 255.255.255.0
 +Please enter media type for ns0 {100tx-fd, auto} [auto]:
 +Please enter the IP address for Network Interface ns1 []:
 +Would you like to continue setup through the web interface? [n]:
 +Please enter the name or IP address of the IPv4 default gateway: 10.10.10.1
 +        The administration host is given root access to the filer'​s
 +        /etc files for system administration. ​ To allow /etc root access
 +        to all NFS clients enter RETURN below.
 +Please enter the name or IP address of the administration host:
 +Please enter timezone [GMT]: CET
 +Where is the filer located? []: ergens
 +What language will be used for multi-protocol files (Type ? for list)?:
 +language not set
 +Do you want to run DNS resolver? [n]: y
 +Please enter DNS domain name []: netapp.local
 +You may enter up to 3 nameservers
 +Please enter the IP address for first nameserver []: 10.10.10.1
 +Do you want another nameserver? [n]:
 +Do you want to run NIS client? [n]:
 +        The Shelf Alternate Control Path Management process provides the ability
 +        to recover from certain SAS shelf module failures and provides a level of
 +        availability that is higher than systems not using the Alternate Control
 +        Path Management process.
 +Do you want to configure the Shelf Alternate Control Path Management interface for SAS shelves [n]:
 +Setting the administrative (root) password for flipflap01 ...
 +New password:
 +Retype new password:
 +Mon Apr 18 12:26:20 CEST [passwd.changed:​info]:​ passwd for user '​root'​ changed.
 +Mon Apr 18 12:26:20 CEST [tapemc.alias.addOK:​info]:​ Alias st0 automatically added for tape device WWN[0:​042:​424200:​000000].
 +Mon Apr 18 12:26:20 CEST [dfu.firmwareUpToDate:​info]:​ Firmware is up-to-date on all disk drives
 +Mon Apr 18 12:26:20 CEST [sfu.firmwareUpToDate:​info]:​ Firmware is up-to-date on all disk shelves.
 +Mon Apr 18 12:26:20 CEST [tapemc.alias.addOK:​info]:​ Alias st1 automatically added for tape device WWN[0:​142:​424200:​000000].
 +Mon Apr 18 12:26:20 CEST [tapemc.alias.addOK:​info]:​ Alias st2 automatically added for tape device WWN[0:​242:​424200:​000000].
 +Mon Apr 18 12:26:20 CEST [tapemc.alias.addOK:​info]:​ Alias st3 automatically added for tape device WWN[0:​342:​424200:​000000].
 +Mon Apr 18 12:26:21 CEST [netif.linkUp:​info]:​ Ethernet ns0: Link up.
 +Mon Apr 18 12:26:21 CEST [perf.archive.start:​info]:​ Performance archiver started. Sampling 22 objects and 195 counters.
 +add net default: gateway 10.10.10.1
 +There are 25 spare disks; you may want to use the vol or aggr command
 +to create new volumes or aggregates or add disks to the existing aggregate.
 +Mon Apr 18 12:26:22 CEST [snmp.agent.msg.access.denied:​warning]:​ Permission denied for SNMPv3 requests from root. Reason: Password is too short (SNMPv3 requires at least 8 characters).
 +Mon Apr 18 12:26:22 CEST [rc:info]: Registry is being upgraded to improve storing of local changes.
 +Mon Apr 18 12:26:22 CEST [rc:info]: Registry upgrade successful.
 +Mon Apr 18 12:26:23 CEST [mgr.boot.disk_done:​info]:​ NetApp Release 7.3.4 boot complete. Last disk update written at Wed Jul 21 23:10:04 CEST 2010
 +Mon Apr 18 12:26:23 CEST [mgr.boot.reason_ok:​notice]:​ System rebooted after a halt command.
 +This process will enable CIFS access to the filer from a Windows(R) system.
 +Use "?"​ for help at any prompt and Ctrl-C to exit without committing changes.
 +
 +        Your filer does not have WINS configured and is visible only to
 +        clients on the same subnet.
 +Do you want to make the system visible via WINS? [n]:
 +        A filer can be configured for multiprotocol access, or as an NTFS-only
 +        filer. Since multiple protocols are currently licensed on this filer,
 +        we recommend that you configure this filer as a multiprotocol filer
 +
 +(1) Multiprotocol filer
 +(2) NTFS-only filer
 +
 +Selection (1-2)? [1]:
 +        CIFS requires local /etc/passwd and /etc/group files and default files
 +        will be created. ​ The default passwd file contains entries for '​root',​
 +        '​pcuser',​ and '​nobody'​.
 +Enter the password for the root user []:
 +Retype the password:
 +        The default name for this CIFS server is '​FLIPFLAP01'​.
 +Would you like to change this name? [n]:
 +        Data ONTAP CIFS services support four styles of user authentication.
 +        Choose the one from the list below that best suits your situation.
 +
 +(1) Active Directory domain authentication (Active Directory domains only)
 +(2) Windows NT 4 domain authentication (Windows NT or Active Directory domains)
 +(3) Windows Workgroup authentication using the filer'​s local user accounts
 +(4) /etc/passwd and/or NIS/LDAP authentication
 +
 +Selection (1-4)? [1]:
 +What is the name of the Active Directory domain? [netapp.local]:​
 +        In Active Directory-based domains, it is essential that the filer'​s
 +        time match the domain'​s internal time so that the Kerberos-based
 +        authentication system works correctly. If the time difference between
 +        the filer and the domain controllers is more than 5 minutes,
 +        authentication will fail. Time services are currently not configured
 +        on this filer.
 +Would you like to configure time services? [y]:
 +        CIFS Setup will configure basic time services. To continue, you must
 +        specify one or more time servers. Specify values as a comma or space
 +        separated list of server names or IPv4 addresses. In Active
 +        Directory-based domains, you can also specify the fully qualified
 +        domain name of the domain being joined (for example: "​NETAPP.LOCAL"​),​
 +        and time services will use those domain controllers as time servers.
 +Enter the time server host(s) and/or address(es) [NETAPP.LOCAL]:​
 +Would you like to specify additional time servers? [n]: y
 +Enter the time server host(s) and/or address(es) []: 10.10.10.1
 +Would you like to specify additional time servers? [n]:
 +Mon Apr 18 12:30:33 CEST [rc:ALERT]: timed: time daemon started
 +        In order to create an Active Directory machine account for the filer,
 +        you must supply the name and password of a Windows account with
 +        sufficient privileges to add computers to the NETAPP.LOCAL domain.
 +Enter the name of the Windows user [Administrator@NETAPP.LOCAL]:​
 +Password for Administrator@NETAPP.LOCAL:​
 +CIFS - Logged in as Administrator@NETAPP.LOCAL.
 +        The user that you specified has permission to create the filer'​s
 +        machine account in several (2) containers. Please choose where you
 +        would like this account to be created.
 +
 +(1) CN=computers
 +(2) OU=Domain Controllers
 +(3) None of the above
 +
 +Selection (1-3)? [1]:
 +Mon Apr 18 12:31:19 CEST [snmp.agent.msg.access.denied:​warning]:​ Permission denied for SNMPv3 requests from this user. Reason: Password is too short (SNMPv3 requires at least 8 characters).
 +Mon Apr 18 12:31:19 CEST [snmp.agent.msg.access.denied:​warning]:​ Permission denied for SNMPv3 requests from root. Reason: Password is too short (SNMPv3 requires at least 8 characters).
 +Mon Apr 18 12:31:19 CEST [passwd.changed:​info]:​ passwd for user '​root'​ changed.
 +CIFS - Starting SMB protocol...
 +        It is highly recommended that you create the local administrator
 +        account (FLIPFLAP01\administrator) for this filer. This account allows
 +        access to CIFS from Windows when domain controllers are not
 +        accessible.
 +Do you want to create the FLIPFLAP01\administrator account? [y]:
 +Enter the new password for FLIPFLAP01\administrator:​
 +Retype the password:
 +        Currently the user "​FLIPFLAP01\administrator"​ and members of the group
 +        "​NETAPP\Domain Admins"​ have permission to administer CIFS on this
 +        filer. You may specify an additional user or group to be added to the
 +        filer'​s "​BUILTIN\Administrators"​ group, thus giving them
 +        administrative privileges as well.
 +Would you like to specify a user or group that can administer CIFS? [n]:
 +Welcome to the NETAPP.LOCAL (NETAPP) Active Directory(R) domain.
 +
 +CIFS local server is running.
 +
 +
 +Data ONTAP (flipflap01.netapp.local)
 +login: root
 +Password:
 +</​code>​
 +
 +> When you start using your netapp (or simulator) keep this [[netappcaveat|caveat]] in mind when you're creating aggregates. ​
 +
 +{{tag>​hardware netapp install storage unfinished}}
netappsimulator.txt ยท Last modified: 2017/01/03 11:23 (external edit)