SHIFT

--- Sjoerd Hooft's InFormation Technology ---

User Tools

Site Tools


srm
Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
srm [2013/10/02 10:29]
sjoerd [Site Recovery Manager 5.1]
srm [2014/02/26 16:18] (current)
sjoerd [Configure Array Manager]
Line 160: Line 160:
  
 = Configure Array Manager = = Configure Array Manager =
 +
 +> Note that the "​options httpd.admin.enable on" needs to be done on the storage before the Array Manager can be added. Otherwise this error will be shown:
 +<​code>​
 +SRA command '​discoverArrays'​ failed. Address of the storage array is not reachable. Storage array might be down or IP address entered might be incorrect. Ensure that the storage array is up and running and the IP address of the storage ​ array is reachable through the command line interface. ​
 +</​code>​
 +
 +
 The Array Manager is the software piece responsible for managing the storage. This is your graphical interface towards your storage device. To configure one go into your Site Recovery view and click the Array Managers button in the left under corner. This will provide you with an "Add Array Manager"​ button the left top corner: \\ The Array Manager is the software piece responsible for managing the storage. This is your graphical interface towards your storage device. To configure one go into your Site Recovery view and click the Array Managers button in the left under corner. This will provide you with an "Add Array Manager"​ button the left top corner: \\
 {{srm24.jpg}} \\ {{srm24.jpg}} \\
srm.txt ยท Last modified: 2014/02/26 16:18 by sjoerd